Document print speeds are the averages of ESAT in Office Category Test for the default simplex mode, ISO / IEC 24734, excluding time to print the first set.
Photo print speed is based on the default setting using ISO / JIS-SCID N2 on Photo Paper Plus Glossy II and does not take into account data processing time on host computer.
Print speed may vary depending on system configuration, interface, software, document complexity, print mode, page coverage, type of paper used etc.

Ink droplets can be placed with a pitch of 1/4800 inch at minimum.

Paper types NOT supported for borderless printing are as follows:
Plain paper, High Resolution Paper, Photo Stickers,T-Shirt Transfer, Envelope.

Optical resolution is a measure of maximum hardware sampling resolution, based on ISO 14473 standard.

The fastest speed in Hi-Speed USB on Windows PC. Transfer time to computer is not included.

Colour document scan speed is measured with ISO / IEC FCD 24735 Annex C Test Chart A.
Scan speed indicates the time measured between pressing the scan button of the scanner driver and the on-screen status display turns off.
Scan speed may vary depending on system configuration, interface, software, scan mode settings and document size etc.

Copy speeds are the average of FCOT and continuous copy speed, ISO / IEC 24735 Annex D.
Copy speed may vary depending on document complexity, copy mode, page coverage, type of paper used etc. and does not take into account warming up time.

When printing ISO / JIS-SCID N2 pattern on 4 x 6" Photo Paper Plus Glossy II using default settings.

When copying ISO / JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings.

You need to install all black and colour ink tanks or ink cartridges whether you perform mono or color printing. If any ink tank or ink cartridge is not installed, an error occurs, and printing, scanning or copying cannot proceed until a new ink tank or ink cartridge is installed.

Depending on the paper used or the print settings, color ink may be used even when you print a mono document. When any ink colour has run out, you need to replace the ink cartridge to continue printer operations.

To optimise printer performance, Canon inkjet printers undergo an automatic cleaning process, during which the printer purges ink from the nozzles to prevent them from being clogged. During this process, a very small amount of ink will be used. In addition, when you use the printer for the first time, a small amount of ink will be used in the initialisation stage. In these instances, all colors of ink may be utilised.

Generally, parts required in the repair of a printer are available for two to five years after production of such model is discontinued. Depending on your printer model, we may recommend that you replace a printer requiring repair with a new printer of the same model or of another model with similar functions. In such case you may not be able to use the supplies or accessories previously used with your replaced printer. Your operating system may also need to be upgraded. Please consult your local authorised Canon contact accordingly.

Generally, the warranty for your printer will be for one year from the date of purchase subject to the actual terms of your local warranty. The warranty does not cover printer supplies such as paper and ink tanks/cartridges. For full and actual terms of your warranty, please refer to your warranty card or local authorised Canon contact.

To obtain good printing quality, use up ink within six months after opening.

Costs of the rectification of problems with your printer caused or contributed by the use of non-genuine Canon ink tank or cartridges (including where a genuine Canon Ink tank or cartridge is supplemented or fed with non-genuine Canon ink) may not be covered under your printer warranty. Please keep this in mind when using non-genuine Canon ink.